This new body kit is not just a one-piece body, but a total aesthetic conversion for the Ion, with a new body, a front regulator shroud, and a new, highly styled, 45-degree grip. The body kit was made using specifications supplied by Smart Parts for reliability and the truest fit possible to the Ions internals and frame. Made of durable composite materials, Redz ensured that the well-known light weight of the Smart Parts Ion would remain intact. The body itself protects the Ion markers internals, and gives it a distinct, sleek look like no other body out there. The regulator shroud was designed to not just change the looks, but enhance comfort when holding the marker for longer periods of time. Finally, Redz designed a new 45 degree grip that is a work of art in and of itself, sporting Redz Rip-Stripe reference design for 2007. All three parts completely change the look of the Ion. The Ion Body Conversion Kit is one of two comprehensive groups of upgrades that Redz International has created for Ion markers. Other upgrades include the already-well-known Triggerz, ASAs with Railz, Cam-Lock feed necks, Pepper Stickz Barrels, and the Redz Ion Boltz.

This new body kit is not just a one-piece body, but a total aesthetic conversion for the Ion, with a new body, a front regulator shroud, and a new, highly styled, 45-degree grip. The body kit was made using specifications supplied by Smart Parts for reliability and the truest fit possible to the Ion's internals and frame. Made of durable composite materials, Redz ensured that the well-known light weight of the Smart Parts Ion would remain intact. The body itself protects the Ion marker's internals, and gives it a distinct, sleek look like no other body out there. The regulator shroud was designed to not just change the looks, but enhance comfort when holding the marker for longer periods of time. Finally, Redz designed a new 45 degree grip that is a work of art in and of itself, sporting Redz' "Rip-Stripe" reference design for 2007. All three parts completely change the look of the Ion. The Ion Body Conversion Kit is one of two comprehensive groups of upgrades that Redz International has created for Ion markers. Other upgrades include the already-well-known Triggerz, ASAs with Railz, Cam-Lock feed necks, Pepper Stickz Barrels, and the Redz Ion Boltz.

High-efficiency bolt for the Ion - lighter, more air efficient, and better aerodynamics for better performance. The bolt increases air efficiency, reduces the overall weight of the Ion, and boosts performance in several noticeable areas: WEIGHT: The Redz Ion bolt is 11.4 grams lighter than the stock bolt. This translates to a quicker cycling time, less recoil and less air required to push the bolt back and forth.. CONSTRUCTION: The Redz Ion bolt is made of aircraft-grade aluminum, and hard-anodized, making it rugged and long-lasting. AERODYNAMICS: Designed with high-flow air porting, which requires less air pressure, and a lower dwell. The dwell in an Ion can be reduced from the default setting of 50, down to between 25 and 35. The forward chamber is also hollowed out so paint is hit with a cushion of air, which will distort the ball less, leading to a more accurate shot, and less paint breakage. AIR SEAL: Multiple O-Rings in the rear of the bolt allow for a better air seal, and less leakage when the Ion is fired. Redz also incorporated the best o-rings money can buy theyre made of neoprene and wont wear out as easily as other o-rings commonly found elsewhere. All of these factors combine into a bolt that is a must-have upgrade for any Ion owner who is looking for greater performance, less weight, and a more accurate shot. Players will get better performance out of their Ion, using less air, which will let them play for longer.

Hold on, never let go!  Redz knows that it's no fun to lose your hopper in the middle of a game. With a Cam-Lock installed on your marker, this calamity will never happen, no matter what hopper you use.  Features:Lever System - Redz uses a cam-lever method of attaching a hopper to a marker. One snap of the lever and your hopper stays on for good - until you decide to take it off.  Maximum Strength - Wickedly strong, aircraft-grade aluminum was used to make Cam-Locks, making them very durable and light.  Tool-Less Adjustment - Another first, Redz provides a heavily textured twist-knob that adjusts the tension on the lever to fit your hopper. Even with paint-soaked gloves, you can still adjust the Cam-Lock with just two fingers - no tools needed! Textured Feed - A specially milled, textured surface inside the clamp itself adds extra "bite" when you snap on your hopper, further securing it in place and adding more friction and resistance, just in case it tries to come loose.  All Brass Hinge - Brass is a strong, self-lubricating metal, and Redz used it on the hinge to make opening and closing the lever a smooth action, and to keep the hinge strong, year after year of use. Exhaust Port - To prevent a paintball from blowing back into your feed-neck, Redz included an exhaust port to let the air out and prevent a blender catastrophe in the middle of your game.  Fits the Ion, Impulse, Shocker, Nerve, Bushmaster, BKO, and Freestyle. **Installing on ProMaster will void warranty.**

REDZ INTERNATIONAL CAM-LOCK CLAMPING FEEDNECK NEW! FOR ION IMPULSE SHOCKER OR NERVE HOLD ON, NEVER LET GO! Redz knows that its no fun to lose your hopper in the middle of a game. With a Cam-Lock installed on your marker, this calamity will never happen, no matter what hopper you use. A. LEVER SYSTEM Redz uses a cam-lever method of attaching a hopper to a marker. One snap of the lever and your hopper stays on for good - until you decide to take it off. B. MAXIMUM STRENGTH Wickedly strong, aircraft-grade aluminum was used to make our Cam-Locks, making them very durable and light. C. TOOL-LESS ADJUSTMENT Another first, Redz provides a heavily textured twist-knob that adjusts the tension on the lever to fit your hopper. No tools are needed! D. TEXTURED FEED A specially milled, textured surface inside the clamp itself bites onto the feed tube of your hopper when you snap it on. E. ALL-BRASS HINGE A strong, self-lubricating metal, and we made the hingeout of brass to make opening and closing the lever a smooth action, and to keep the hinge strong, year after year of use. F. EXHAUST PORT To prevent a paintball from blowing back into your feed-neck, weve included an exhaust port to let the air out and prevent a blender catastrophe in the middle of your game.